ShaRPiKeebo kit turns a Raspberry Pi Zero 2 W into a pocket computer with a keyboard and display (crowdfunding)
The Raspberry Pi Zero 2 W is a tiny, adaptable minor laptop board able of working much of the same application that its a bit larger siblings thanks to its quad-main ARM Cortex-A53 processor. But the $15 pc board is not a lot use with no added hardware like a keyboard and display screen.
ShaRPiKeebo is an increase-on that presents you the two of all those factors in a compact package smaller ample to match in your pocket, effectively turning the Raspberry Pi Zero 2 W into a pocket computer system or game console that you can use wherever. Initial declared in January, the ShaRPiKeebo is now up for pre-buy for $150 by a Group Provide marketing campaign which a short while ago fulfilled its crowdfunding goal, which implies the developers have raised more than enough revenue to create the machine and (with any luck ,) start delivery models to backers in November, 2022.
Developer Sulfuroid has developed a custom printed circuit board with constructed-in switches that can be utilised as a 56-important keyboard for thumb typing, in addition a established of further keys established up in a D-Pad arrangement, allowing you to use them as recreation controllers.
At the major of the board there is a 2.7 inch, 400 x 240 pixel, daylight-readable black and white Sharp memory Lcd display. A lengthy-array wireless transceiver also allows you use the product for messaging no matter whether you’re connected to WiFi or not.
The total detail measures just 115 x 66 x 20mm (4.5″ x 2.6″ x .8″), making the gadget smaller than most smartphones, if a bit thicker and more… bare wanting. But even though the first system experienced been to ship just the board, a undertaking update means that backers of the crowdfunding campaign will also get an enclosure that can make the entire thing look a little bit extra like a completed products (and a extra pocket-helpful 1 that will not snag or tear a hole in your trousers).
The enclosure will either be created from plastic making use of a molding approach or designed employing a 3D printer. Individuals aspects are nonetheless a perform in development.
Developed to run on battery energy, the ShaRPiKeebo has on-board battery administration, a LiPo battery connector, and a charging module that allows you recharge a battery with a USB-C charger. Hope up to 6 hours of battery life if you opt for a 6,000 mAh battery or all around 3 hours of active use with a 3,000 mAh battery.
The developer has been sharing photos and brief movies of the venture on Twitter for months, detailing the components and displaying the product in action. At this point, Sulfuroid states availability of all factors has been confirmed, and fabrication and assembly partners have been lined up.
So the following ways, would be to maker a smaller batch of units for testing and validation in the hopes of shipping models to backers inside of 3 months of the conclude of the crowdfunding campaign… even though there is certainly no warranty that this will come about, as there is usually some threat concerned in crowdfunding.
https://www.youtube.com/check out?v=JpJRGaFYkAo
This is not the 1st job we’ve noticed that makes an attempt to flip a Raspberry Pi Zero into a pocket-sized computer system. The PCB and keyboard remind me the SnapOnAir Raspberry PI Zero PCB that’s been readily available given that early 2019. But ShaRPiKeebo attributes a various keyboard format, a different display, and that extensive-range wi-fi radio, which can help it stand out.
The ShaRPiKeebo crowdfunding marketing campaign operates through July 28, 2022.
by using Tom’s Hardware
This post was 1st released January 18, 2022 and most just lately current July 25, 2022.